Spaulding-lighting ARF4 Architectural 84 LED Floodlight Manual do Utilizador Página 2

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 4
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 1
INSTALLATION INSTRUCTIONS - ARF LED FLOOD SHEET 2 OF 2
SAVE THESE INSTRUCTIONS
701 Millennium Boulevard Greenville, SC 29607 (864) 678-1000
Mounting The Visor (See Fig. 2)
Turn off power to electrical connections.
Remove fixture from packaging along with hardware bag.
Remove the two screws at the locations shown in Fig. 2.
Mount the visor using the #6-32 x 1/2" long screws supplied with the Visor.
Adjust visor to the desired loaction and tighten the screws until firm.
Installing the Photocontrol (See Fig. 3 and Fig. 4)
Turn off power to electrical connections.
Wiring must be performed by a qualified electrician.
Remove fixture from packaging along with hardware bag.
Using a torx head screw driver, remove the 6-Screws on the rear of the ARF3 or the
10-Screws on the rear of the ARF4.
Remove the Rear Plate and Drill a 3/4" diameter hole on the location shown in Fig 3a for
ARF3 or Fig 3b for ARF4.
Mount the Photocontrol in the drilled hole.
Connect the Photocontrol as shown in Fig. 4a for ARF3 or Fig 4b for ARF4.
Reinstall the Rear Housing and tighten the Screws that were removed.
NOTES:
For replacement LED Assemblies and Drivers please contact Hubbell Lighting for any replacement parts.
Contact your local distributor or agent to confirm parts availability prior to ordering replacement parts.
LOCATION OF SCREWS
TO BE REMOVED
Fig. 2: Mounting The Visor
1.625
1.755
O
.750
2.500
1.250
O
.750
Fig 3a: ARF3 Rear Plate with Hole
www.spaulding-ltg.com
Fig 3b: ARF4 Rear Plate with Hole
WHITE(NEUT)
BLACK (LINE)
RED(+)
BLACK(-)
BLACK
PURPLE(+)
GREY(-)
DRIVER
LED BOARD
AC INPUT
DC OUTPUT
DIMMING
LEADS
Fig 4a: Wiring Diagram for ARF3 Flood
RED
PHOTOCONTROL
OPTION
GROUND
COM
LINE
GREEN
GRD
BLACK
RED
WHITE(NEUT)
BLACK (LINE)
RED(+)
BLACK(-)
BLACK
PURPLE(+)
GREY(-)
DRIVER
LED BOARD
AC INPUT
DC OUTPUT
DIMMING
LEADS
Fig 4b: Wiring Diagram for ARF4 Flood
RED
WHITE(NEUT)
BLACK (LINE)
RED(+)
BLACK(-)
PURPLE(+)
GREY(-)
DRIVER
AC INPUT
DC OUTPUT
DIMMING
LEADS
LED BOARD
RED(+)
BLACK(-)
BLACK
RED
FUSE
OPTION
SURGE
OPTION
BLACK (LINE)
WHITE(NEUT)
GREEN(GRD)
WHITE
GREEN
BLACK
BLACK
/RED
PHOTOCONTROL
OPTION
GROUND
COM
LINE
GREEN
GRD
BLACK
RED
BLACK
RED
FUSE
OPTION
SURGE
OPTION
BLACK (LINE)
WHITE(NEUT)
GREEN(GRD)
WHITE
GREEN
BLACK
BLACK
/RED
Vista de página 1
1 2 3 4

Comentários a estes Manuais

Sem comentários